Pregnancy Due Date Calculator — Estimate due date and key pregnancy milestones
The Pregnancy Due Date Calculator estimates an expected due date and pregnancy timeline from the dating information you have: last menstrual period, conception or ovulation date, ultrasound gestational age, or IVF transfer date. It also shows gestational age, an approximate conception window, trimester boundaries, and milestone dates for planning conversations with an obstetric clinician.
How to use
Choose the Calculation method that matches your best available information. If you know the first day of the last menstrual period, select Last menstrual period, enter that date, and enter the Average cycle length in days. Use the first day of bleeding, not the last day. If you tracked ovulation or have a reliable conception date, select Conception or ovulation date and enter that date. If you are using a scan report, choose Ultrasound gestational age, then enter the Ultrasound date plus the reported Ultrasound age, weeks and Extra days. If the pregnancy followed IVF, choose IVF embryo transfer, enter the Embryo transfer date, and select the Embryo age at transfer, days.
Set Calculate gestational age as of to today or another date you want to audit. The result panel shows the Estimated due date, Current gestational age, Estimated conception window, Second trimester starts, Full term begins, and milestone dates. The progress bar shows how far the as-of date is through a 40-week pregnancy. If a field is highlighted, correct it before relying on the output. Use Reset to defaults to return to the sample LMP calculation.
Formula
Step by step
Worked audit trail using LMP dating: Last menstrual period = April 14, 2026. Average cycle length = 28 days. As-of date = July 21, 2026.
- Start with the LMP formula: EDD = LMP + 280 days + (cycle length - 28 days).
- Compute the cycle adjustment: 28 - 28 = 0 days.
- Add 280 days to April 14, 2026: the estimated due date is January 19, 2027.
- Estimate gestational age on July 21, 2026: July 21, 2026 minus April 14, 2026 = 98 days.
- Convert 98 days to weeks and days: 98 ÷ 7 = 14 weeks and 0 days.
- Estimate the ovulation-centered conception date for a 28-day cycle: April 14 + 14 days = April 28, 2026.
- Show the approximate conception window: April 25 to April 29, 2026.
- Calculate milestones from LMP: 12 weeks = July 7, 2026; 20 weeks = September 1, 2026; 37 weeks = December 29, 2026; 40 weeks = January 19, 2027; 42 weeks = February 2, 2027.
Clinical interpretation: this is a coherent LMP-based timeline, but an early ultrasound or IVF record may supersede it if the clinician determines that LMP dating is unreliable.
Detailed calculation guide
AI Overview: The Pregnancy Due Date Calculator estimates an expected due date by applying standard obstetric dating rules to LMP, conception, ultrasound, or IVF transfer information. The most common rule is 40 weeks from the first day of the last menstrual period. Because ovulation, cycle length, early fetal measurements, and assisted reproduction records can change dating accuracy, results should be treated as planning estimates rather than medical decisions.
Featured Snippet: A pregnancy due date is usually calculated by adding 280 days, or 40 weeks, to the first day of the last menstrual period. If conception is known, add 266 days. For IVF, use the embryo transfer date plus 266 days minus the embryo age at transfer.
Pregnancy dating uses gestational age, not fetal age. Gestational age is counted from the first day of the last menstrual period, even though conception usually occurs about two weeks later in a 28-day cycle. That convention lets clinicians use a reproducible starting point, compare fetal growth to established charts, and time prenatal screening windows. The calculator therefore converts every method back to an estimated gestational-age timeline before showing milestones.
The last menstrual period method is the familiar rule sometimes called Naegele-style dating: start with the first day of the last normal menstrual period and add 280 days. This assumes a 28-day menstrual cycle with ovulation around day 14. If a person has consistently shorter or longer cycles, the estimate can be adjusted by the difference between their usual cycle length and 28 days. A 31-day cycle adds three days; a 25-day cycle subtracts three days. The adjustment is still approximate because ovulation timing varies even in people with regular cycles.
Conception-date dating begins from the likely day of ovulation, insemination, or conception and adds 266 days. This is not the same as saying pregnancy begins on that date in clinical records. Clinicians usually document gestational age as about two weeks more than conception age. If the calculator estimates a gestational age of 10 weeks from a known conception date, the embryo or fetal age is closer to 8 weeks. That distinction matters when comparing app timelines, laboratory timing, and ultrasound reports.
Ultrasound dating uses the gestational age measured on the scan date. If an ultrasound on June 9 says 8 weeks 0 days, the estimated due date is June 9 plus the 224 remaining days to reach 40 weeks. Early ultrasound can be especially useful when the LMP date is uncertain, cycles are irregular, bleeding was mistaken for a period, or ovulation occurred later than expected. Later ultrasounds are valuable for growth assessment, but a clinician may not revise the due date simply because a later size estimate differs.
IVF dating is different because the embryo age and transfer date are documented. For an embryo transfer, the estimate is transfer date plus 266 days minus the embryo age. A day 5 blastocyst transferred on May 3 produces a different due date than a day 3 embryo transferred on the same date. Assisted reproductive technology pregnancies should generally be dated from treatment records rather than retrofitted to an LMP estimate.
- Common Mistakes
Using the last day of the period instead of the first day of the last normal menstrual period is the most common input error. Another mistake is assuming that the due date is the most likely birth date. It is an anchor for prenatal care, not a delivery appointment. People also mix up gestational age and conception age, ignore a consistently non-28-day cycle, or change the date after every scan without clinical guidance. If dates conflict, bring the original LMP, scan report, and IVF record to the clinician instead of trying to average them.
- Assumptions
The LMP option assumes the entered date was the start of a true menstrual period, not spotting, implantation bleeding, withdrawal bleeding, or bleeding after pregnancy had already begun. The cycle-length adjustment assumes a regular cycle pattern. The conception option assumes the entered date is close to ovulation or fertilization. The ultrasound option assumes the gestational age entered matches the report. The IVF option assumes the embryo age at transfer is known. All outputs assume a standard 280-day gestational framework for singleton pregnancy dating.
- Limitations
No calculator can determine fetal health, viability, growth restriction, ectopic pregnancy, miscarriage risk, labor timing, or whether a due date should be formally revised. LMP can be unreliable with irregular periods, recent hormonal contraception, lactation, polycystic ovary syndrome, postpartum cycles, or uncertain recall. Ultrasound estimates depend on scan timing and measurement quality. IVF estimates are usually precise for dating but still do not predict the actual day of birth. Medical teams may use additional information and local guidelines.
- Practical Applications
The estimated due date helps organize prenatal appointments, screening windows, travel decisions, leave planning, childcare logistics, and conversations with family. The trimester dates help users understand broad pregnancy stages. The 12-week and 20-week milestone dates are useful for discussing common visit and screening periods. The 37-week, 40-week, and 42-week dates help explain why clinicians use terms such as term, due date, and post-term with care.
- Tips
Enter dates from records whenever possible. For LMP, use the first day of bleeding from the last normal period. For cycle length, enter the typical number of days from one period start to the next. If cycles vary widely, do not overtrust the cycle-length adjustment. For ultrasound, enter the scan date and the gestational age exactly as reported, including extra days. For IVF, check whether the transfer was day 3, day 5, or day 6 rather than guessing.
- Interpretation
A result of 14 weeks 0 days means 14 completed weeks of gestational age, not that conception happened 14 weeks ago. A due date of January 19 means the pregnancy reaches 40 weeks on that date if the dating inputs are correct. Birth before or after that date can still be normal. A milestone date is best read as a planning marker, not a diagnostic boundary. The calculator intentionally labels dates as estimates because clinical dating is a decision made in context.
- Related Formulas
The core identities are simple but method-specific. LMP due date equals LMP plus 280 days plus the cycle adjustment. Conception due date equals conception date plus 266 days. Ultrasound due date equals scan date plus 280 days minus measured gestational age in days. IVF due date equals transfer date plus 266 days minus embryo age in days. Gestational age on any as-of date equals that date minus the estimated LMP-equivalent date.
- Best Practices
Keep one documented working due date after it is established by your clinician. If you use the calculator repeatedly, record the method used each time so you do not compare LMP, conception, and ultrasound outputs as if they were identical evidence. Prefer early clinical ultrasound when LMP is unknown or cycles are irregular. Use IVF records for assisted reproduction. For medical forms, insurance paperwork, work leave, or travel certificates, use the due date documented by the obstetric team.
- When NOT to use this calculator
Do not use this calculator to decide whether symptoms are urgent, whether medication is safe, when to induce labor, whether fetal growth is normal, or whether a pregnancy is viable. Do not use it to rule out pregnancy or to interpret bleeding, pain, fever, high blood pressure symptoms, decreased fetal movement, or severe nausea. Those situations need direct medical advice. The calculator is also not appropriate for legal paternity conclusions because conception windows are approximate.
- Real-world examples
A person with a known LMP of April 14 and a 28-day cycle gets an estimated due date of January 19. If the same LMP is paired with a 35-day cycle, the estimate moves one week later because ovulation may have occurred later. A person who tracked ovulation on April 28 gets the same January 19 estimate by adding 266 days. A day 5 embryo transfer on May 3 estimates January 19 because the embryo was already five days beyond fertilization at transfer.
- Comparison / educational intent
Many due date tools stop after one date. A stronger educational calculator shows why the date changed, what gestational age means today, how conception windows differ from gestational dating, and which inputs deserve more trust. LMP is accessible but vulnerable to recall and cycle errors. Conception dating is useful when ovulation is well documented. Early ultrasound can clarify uncertain dating. IVF transfer dating is often the cleanest arithmetic because the reproductive timeline is recorded. The best answer is the one that matches the highest-quality evidence available to the patient and clinician.
The Pregnancy Due Date Calculator is designed for informed planning: it gives transparent arithmetic, date ranges, and milestone context without pretending to replace prenatal care. Use it to prepare better questions, reconcile calendar dates, and understand the language of gestational age, estimated due date, term pregnancy, and post-term pregnancy.
Beginner LMP estimate with a 28-day cycle
Estimated due date: Jan 19, 2027; gestational age: 14 weeks 0 days.
A standard 28-day cycle uses LMP plus 280 days without cycle adjustment.
LMP estimate with a longer 35-day cycle
Estimated due date: Jan 26, 2027; cycle adjustment: plus 7 days.
Longer regular cycles may ovulate later, so the LMP estimate shifts later by cycle length minus 28.
Known conception or ovulation date
Estimated due date: Jan 19, 2027; gestational age: 14 weeks 0 days.
Adding 266 days to the conception date aligns with an LMP-equivalent date about 14 days earlier.
Ultrasound dating from a scan report
Estimated due date: Jan 19, 2027; gestational age on as-of date: 14 weeks 0 days.
The scan date plus the remaining 224 days to 40 weeks gives the due date.
IVF day 5 blastocyst transfer
Estimated due date: Jan 19, 2027; conception-equivalent date: Apr 28, 2026.
The IVF formula subtracts embryo age from the 266-day conception-based interval.
Frequently asked questions
How is a pregnancy due date calculated?
The most common estimate adds 280 days, or 40 weeks, to the first day of the last menstrual period. Other valid methods use conception date, ultrasound gestational age, or IVF transfer records.
Is the due date exact?
No. An estimated due date is a clinical planning anchor, not a prediction of the birth day. Many births occur before or after the 40-week date.
What is gestational age?
Gestational age is how far along a pregnancy is, usually counted from the first day of the last menstrual period. It is typically about two weeks greater than conception age.
Why does my ultrasound due date differ from my LMP due date?
LMP dating can be affected by uncertain recall, irregular cycles, delayed ovulation, or bleeding that was not a true period. Early ultrasound may better establish dating in those situations.
How do I calculate a due date after IVF?
Use the embryo transfer date and embryo age. The standard arithmetic is transfer date plus 266 days minus the embryo age in days, such as day 3 or day 5.
Should I use the first or last day of my period?
Use the first day of the last normal menstrual period. Entering the last day of bleeding can shift the due date several days later than standard obstetric dating.
Does cycle length change the due date?
It can. LMP dating assumes a 28-day cycle. If cycles are consistently longer or shorter, this calculator adjusts the estimate by cycle length minus 28 days.
What is an estimated conception window?
It is an approximate range around likely ovulation or fertilization. It is useful for education but should not be treated as exact proof of the date conception occurred.
When does the second trimester start?
Many clinical and educational resources place the second trimester around week 14. This calculator shows the estimated date at 14 weeks from the LMP-equivalent start date.
When is pregnancy considered full term or post-term?
Clinician-facing terminology is specific. This calculator marks 37 weeks as an early term milestone and 42 weeks as a post-term threshold, but care decisions require a clinician.
Can I change my due date after every ultrasound?
Not usually. Later ultrasound size estimates can differ for growth-related reasons. Clinicians generally use dating guidance and the best early evidence before revising an EDD.
Can this calculator tell me if my pregnancy is healthy?
No. It estimates dates only. Symptoms, fetal growth, viability, medication safety, bleeding, pain, blood pressure concerns, or decreased fetal movement require medical care.
Related calculators
- Protein Calculator — Estimate daily calories, TDEE, and macro targets
- Body Fat Calculator — Calculate body mass index with instant category guidance
- TDEE Calculator — Estimate daily calories, TDEE, and macro targets
- BMI Calculator — Calculate body mass index with instant category guidance
- Mortgage Calculator — Calculate monthly loan payment and total interest
- FICA Tax Calculator — Estimate U.S. take-home pay after taxes and deductions
- Federal Income Tax Calculator — Estimate tax liability, credits, and after-tax income
Browse all calculators in this category
Editorial review
Author: JD
Sources
Enable JavaScript to use interactive calculators.