IB Predicted Grade Calculator — Find the score needed to reach your target grade

The IB Predicted Grade Calculator estimates the average score needed on remaining assessed work to reach a target IB subject boundary. Enter your current average on completed components, the completed weighting, a target boundary, and optional grade-boundary assumptions to see the required remaining score, predicted final percentage, and likely 1–7 subject grade.

How to use

Enter your current average on completed work (%) first. This should be the average score across assessed components already completed, after any component-level marking has been converted to a percentage. Next, enter Completed assessment weight (%), which is the share of the final subject mark already represented by that work. If only an internal assessment worth 20% is complete, enter 20, not the number of assignments completed.

Enter Target grade boundary (%) as the minimum final percentage you want to reach. For example, if your teacher says a grade 7 is likely to begin around 85%, enter 85 for a grade-7 target. If you are planning for a grade 6, enter the grade-6 boundary instead. Use school guidance where available, because IB boundaries vary by subject, level, component, and session.

Use Expected remaining average (%) to test a realistic forecast for the work not yet assessed. The calculator will show a predicted final score, the gap to the target boundary, and a predicted IB grade using the grade-boundary fields below. Adjust Grade 7 from (%), Grade 6 from (%), and the lower boundaries if your subject uses different thresholds.

Read Score needed on remaining work as the key result. If it is below 0%, the selected target is already reached by the completed contribution. If it is between 0% and 100%, the target is mathematically reachable. If it is above 100%, the target is not reachable under the current assumptions. Use Reset to defaults to return to the sample values.

Formula

$$\text{Completed contribution}=\text{Current average}\times\frac{\text{Completed weight}}{100}$$ $$\text{Remaining weight}=100-\text{Completed weight}$$ $$\text{Required remaining average}=\frac{\text{Target boundary}-\text{Completed contribution}}{\text{Remaining weight}/100}$$ $$\text{Predicted final score}=\text{Completed contribution}+\text{Expected remaining average}\times\frac{\text{Remaining weight}}{100}$$ $$\text{Gap to target}=\text{Predicted final score}-\text{Target boundary}$$

Step by step

Worked audit trail using the default values: Current average on completed work = 82%, Completed assessment weight = 70%, Target grade boundary = 90%, Expected remaining average = 88%.

  1. Convert the completed work into a final-course contribution: $82\times\frac{70}{100}=57.4$ percentage points.
  1. Calculate remaining weight: $100-70=30\%$.
  1. Work out how many percentage points are still needed to reach the target boundary: $90-57.4=32.6$ percentage points.
  1. Divide that missing contribution by the remaining weight as a decimal: $\frac{32.6}{0.30}=108.6667\%$.
  1. Interpret the required score: 108.7% is above 100%, so a 90% target boundary is not mathematically reachable under these assumptions.
  1. Calculate the predicted final score using the expected remaining average: $57.4+88\times\frac{30}{100}=57.4+26.4=83.8\%$.
  1. Compare the predicted score with the target boundary: $83.8-90=-6.2$ percentage points. The current forecast is 6.2 points below the 90% target.
  1. Compare 83.8% with the entered grade boundaries. With the default grade 7 boundary set at 85% and grade 6 boundary set at 73%, the predicted grade is 6.

Detailed calculation guide

AI Overview: The IB Predicted Grade Calculator uses weighted-average assessment math to estimate what score you need on unfinished IB work. It converts your completed performance into a final-course contribution, compares that contribution with a target grade boundary, and solves the remaining average required. The result is useful for planning revision priorities, but it is not an official IB prediction or grade award.

Featured Snippet: An IB predicted grade calculator estimates the remaining score needed to reach a target grade by applying component weights. The core formula is required remaining average = (target boundary - completed contribution) / remaining weight. If the answer is above 100%, the target is not reachable under the selected assumptions.

The calculator is designed for IB Diploma Programme students, parents, tutors, and school counsellors who need a transparent way to discuss grade targets. It does not guess hidden grade boundaries. Instead, it asks you to supply the boundary you want to use, such as a teacher-provided grade 7 boundary, a school mock-exam threshold, or a cautious estimate based on past sessions. This keeps the model honest: the arithmetic is exact, while the boundary assumption remains a judgement call.

IB assessment is not a single flat percentage in most subjects. A subject may combine internal assessment, externally marked coursework, and exam papers. Those components have weights, and final marks are normally interpreted through subject-specific boundaries. The International Baccalaureate explains that Diploma Programme courses receive grades from 7 to 1 and that assessment can include both internal and external components. That is why a student with 82% on completed work is not necessarily “on 82% overall” unless the completed work represents 100% of the final mark.

Use this calculator when you know, or can reasonably estimate, two pieces of information: your current average on the part already assessed and the percentage weight of that assessed work. If 70% of the course has been completed and your average on that 70% is 82%, your contribution to the final course mark is 57.4 percentage points. The remaining 30% can still move the final result, but it cannot rewrite the completed contribution.

  • Common Mistakes

The most common mistake is mixing a completed-work average with a final-course contribution. If your teacher says you have 82% on the work completed so far and that work is worth 70% of the final mark, your completed contribution is not 82 percentage points. It is $82 \times 70\% = 57.4$ percentage points. The remaining work must supply the rest.

Another frequent error is treating last year’s boundaries as fixed. Past boundaries can be helpful for planning, especially when a teacher or department recommends them, but they are not a promise about the current session. Boundaries can vary by subject, level, route, paper difficulty, and assessment session. A realistic plan should test more than one boundary: optimistic, central, and conservative.

Students also mix raw marks, scaled marks, and percentages. A raw paper mark of 54 out of 80 is not the same as 54%. A component scaled to a contribution out of 30 must be converted before it is combined with another component out of 20 or 50. Use the same basis throughout the calculation, ideally final percentage contribution.

HL and SL assumptions can also be confused. Higher Level and Standard Level subjects both award grades from 1 to 7, but the assessment structure and boundaries may differ by subject. Do not reuse an SL boundary for an HL course unless your teacher confirms it is appropriate.

  • Assumptions

This calculator assumes the current score is an average on completed work, not a full-course contribution. It multiplies that average by the completed assessment weight to estimate the completed contribution. It then solves the average required across all remaining assessments.

The target boundary is treated as the minimum final percentage needed for the target grade. If you enter 85% as the grade 7 boundary, the calculator interprets 85.0% as just enough for that target. It does not add a safety buffer unless you choose a higher target boundary.

The expected remaining average is optional planning data. It lets the calculator estimate a predicted final score and predicted grade from your custom boundaries. It should represent your expected average across every remaining component after weighting, not just your hoped-for score on one exam paper.

  • Limitations

The calculator cannot replace school judgement. UCAS guidance for predicted grades emphasizes that predictions should be achievable, objective, evidence-based, and grounded in professional judgement. For IB, schools may consider class evidence, mock exams, coursework drafts, teacher judgement, moderation expectations, and subject-specific policies. A mathematical estimate is one input, not the decision itself.

The tool also cannot know future grade boundaries. If an exam paper is unusually difficult or unusually accessible, the boundary for a grade may change. This is a serious limitation for students trying to plan for a 6 or 7 near the boundary. A student projected at 84.8% with an assumed 85% boundary is not in the same position as a student projected at 92%.

It does not model component-specific constraints. Some subjects have minimum performance expectations, moderated internal assessment marks, oral components, practical work, portfolios, or externally assessed coursework. If a component has a cap, penalty, moderation adjustment, missing-work rule, or late-submission consequence, the simple weighted average may overstate what is possible.

  • Practical Applications

For students, the main application is revision triage. If the calculator says you need 96% across the remaining 40%, you may need to discuss whether the target boundary is realistic or whether a lower subject target would produce a better overall diploma strategy. If it says you need 68%, the next step is to identify which paper or IA criteria can most efficiently secure that score.

For parents, it can make conversations less emotional and more concrete. Instead of asking whether a 7 is “still possible,” the family can ask: what remaining average is needed, what components remain, and what evidence suggests that average is achievable?

For tutors, it can convert vague goals into a measurable plan. A tutor can enter a target boundary and then test how improving one remaining component changes the required average. That supports targeted work on command terms, paper technique, essay structure, data-response accuracy, or internal assessment criteria.

For school counsellors, the calculator can support university application conversations, including UCAS predicted-grade discussions. It should be used carefully: an estimate may indicate whether a goal is mathematically plausible, but the predicted grade itself belongs to the school’s professional process.

  • Tips

Use a boundary range, not a single boundary. Run the calculation at the grade boundary your teacher suggests, then run it again two or three percentage points higher. That tells you whether your target has breathing room.

Enter component weights carefully. If an internal assessment is worth 20% and two exam papers together are worth 80%, do not enter the number of tasks completed; enter the percentage of the final mark already assessed. If only the IA is complete, completed weight is 20%, not one out of three tasks.

Keep raw marks out of the calculator unless you first convert them. If Paper 1 is 39 out of 60 and is worth 30% of the final grade, convert the paper score to a percentage or contribution before combining it with other work.

Use the predicted final score as a discussion starter. If the result is close to the boundary, ask your teacher what evidence would support the predicted grade and whether moderation, mock performance, or component grade descriptors change the interpretation.

  • Interpretation

A required remaining score below 0% means the completed contribution already reaches the selected target boundary. This can happen when the completed weight is high and the target boundary is low. It does not mean future work is irrelevant; weak remaining performance can still lower the final percentage unless the assessment rules or minimum requirements say otherwise.

A required score between 0% and 100% is mathematically reachable. Whether it is academically realistic depends on the remaining components, time available, past performance, and quality of feedback. A required 74% on remaining work may be realistic for a student consistently scoring in the low 80s; it may be ambitious for a student whose recent evidence is in the 50s.

A required score above 100% means the target cannot be reached under the entered assumptions. The response should not be panic or denial. Check whether the completed score, completed weight, and target boundary were entered correctly. If they were, consider a lower target grade, a resit or retake route where applicable, or a stronger strategy for maximizing the highest realistic grade.

  • Related Formulas

The weighted final-score formula is $\text{final score}=\text{completed contribution}+\text{remaining contribution}$. When the current score is entered as an average on completed work, the completed contribution is $\text{current average}\times\frac{\text{completed weight}}{100}$.

The required remaining average is $\frac{\text{target boundary}-\text{completed contribution}}{\text{remaining weight}/100}$. The gap to target is $\text{predicted final score}-\text{target boundary}$. A positive gap indicates the entered expected remaining score clears the target; a negative gap indicates a shortfall.

A full IB diploma-point estimate uses different arithmetic: add six subject grades from 1 to 7 and then add TOK and Extended Essay core points, up to a maximum of 45. CAS is required for the diploma but does not add points. That diploma total is related to, but separate from, a single-subject predicted-grade estimate.

  • Best Practices

Use teacher-provided boundaries whenever possible. Teachers and coordinators are more likely to understand the current specification, component scaling, and school assessment evidence than a generic online source. If you use past boundaries, label them as assumptions in your notes.

Create three planning scenarios. A conservative scenario might set the target boundary higher than expected. A central scenario might use the school’s best estimate. An optimistic scenario might use a lower boundary from a past difficult session. If your target only works in the optimistic scenario, treat it as fragile.

Document your inputs. Write down the date, subject, level, completed components, completed weight, and boundary assumption. This makes later updates meaningful. If a moderated IA score changes or a mock exam is added, you can revise the calculation without losing the audit trail.

Separate subject-grade planning from diploma strategy. A student aiming for 38 total points may not need every subject to be a 7. Sometimes the strongest strategy is to secure reliable 6s while protecting core points and meeting HL or SL passing criteria.

  • When NOT to use this calculator

Do not use the calculator as proof that a school must predict a certain grade. Official predictions are made by schools using evidence and professional judgement, and final grades come through the IB assessment process.

Do not use it when you do not know the component weights. Guessing weights can create false confidence. Find the subject guide, ask the teacher, or use a school markbook that already reports weighted contributions.

Do not use it for final diploma award decisions. The IB Diploma has passing conditions beyond the total score, including subject-grade restrictions, HL and SL point requirements, and completion of core elements. A single-subject calculator cannot evaluate all diploma conditions.

Do not use it for university admissions promises. Admissions decisions, predicted grades, offers, and final acceptance depend on institution rules, course competitiveness, application evidence, and official results.

  • Real-world examples

A Mathematics: Analysis and Approaches HL student has completed an internally assessed exploration worth 20% and scored 78%. The student wants to know the exam-paper average needed to reach an estimated grade 6 boundary of 72%. The calculator shows that the IA contributes 15.6 points, so the remaining 80% must contribute 56.4 points. That requires 70.5% on the remaining exam-weighted work.

An English A student has strong coursework but uncertain exams. With 60% completed at an 86% average and a grade 7 target boundary of 84%, the completed contribution is 51.6 points. The remaining 40% must contribute 32.4 points, so the student needs 81.0% on the remaining work. That is demanding but plausible if the student’s exam evidence is near that level.

A Biology SL student aiming for a 7 after a weak mock may find the required remaining average is 108%. That is not a moral judgement; it is the arithmetic showing that the selected boundary cannot be reached from the current position. The practical question becomes which target is now realistic and what improvement plan protects the overall diploma score.

  • Comparison / educational intent

A weighted grade calculator answers a broad school question: what final percentage results from several weighted categories? A final exam grade calculator usually answers a narrower question: what score is needed on one final exam to reach a course grade. This IB Predicted Grade Calculator sits between them. It handles completed and remaining assessment weight, allows custom IB-style boundaries, and translates the projected percentage into a tentative 1–7 grade.

The educational value is the audit trail. Students learn that predicted grades are not magic labels; they are built from evidence, weights, boundaries, and judgement. The calculator gives the arithmetic layer clearly enough that students can spend less time guessing and more time improving the components that still matter.

Beginner: target a grade 6 boundary

Required remaining average: 68.0%; predicted final score: 77.0%; predicted grade: 6.

The completed contribution is 39.0 points. To reach 73%, the remaining 50% must contribute 34.0 points, so the required remaining average is 68.0%.

Intermediate: grade 7 still within reach

Required remaining average: 83.5%; predicted final score: 85.2%; predicted grade: 7.

The completed contribution is 51.6 points. The target needs 33.4 points from the remaining 40%, which requires 83.5%.

Advanced: high target not mathematically reachable

Required remaining average: 108.7%; predicted final score: 83.8%; predicted grade: 6.

A 90% boundary requires more than full marks on the remaining 30%, so the selected target is unreachable under these assumptions.

Edge case: target already secured by completed contribution

Required remaining average: 0.0%; predicted final score: 88.8%; predicted grade: 7.

The completed contribution is 82.8 points, already above the 80% target boundary. The calculator caps the required remaining score at zero for interpretation.

Real-world IA completed first

Required remaining average: 70.5%; predicted final score: 72.4%; predicted grade: 6.

An IA worth 20% contributes 15.6 points. The remaining exam-weighted work must average 70.5% to reach a 72% grade-6 boundary.

Frequently asked questions

Is this IB predicted grade calculator official?

No. It is an independent planning calculator that applies weighted-average math to the values you enter. Official predicted grades come from schools, and final grades come through the IB assessment process.

What score do I need to get a 7 in IB?

Enter your current average, completed assessment weight, and an estimated grade-7 boundary for your subject and level. The calculator solves the average score needed on the remaining work to reach that boundary.

Do IB grade boundaries change?

Yes. Grade boundaries can vary by subject, level, paper, component, and exam session. Past boundaries are useful planning references, but they should not be treated as guaranteed current thresholds.

Can I use this for both Higher Level and Standard Level subjects?

Yes, if you enter the correct component weights and boundaries for that specific subject and level. Do not assume HL and SL use the same boundary pattern unless your teacher confirms it.

What does it mean if the required remaining score is over 100%?

It means the selected target boundary is not mathematically reachable with the current score and weighting assumptions. Check the inputs first, then consider a different boundary or target grade.

What does it mean if the required remaining score is below 0%?

It means the completed contribution already reaches the selected target boundary. Future work still matters because poor remaining performance can lower the final score unless all assessment is already complete.

Should I enter raw marks or percentages?

Use percentages or final-course contributions consistently. If you have raw marks, convert each mark to the same basis before entering it, especially when components have different maximum marks or weights.

Can this calculate my total IB diploma points?

This calculator focuses on one subject. To estimate diploma points, add six subject grades and TOK/Extended Essay core points. The maximum is 45, and CAS is required but does not add points.

How are TOK, Extended Essay, and CAS treated?

TOK and Extended Essay can contribute up to three core points together. CAS does not add points, but it is required for the diploma. This subject calculator does not model core points.

Can I use this for UCAS predicted grades?

You can use it as supporting arithmetic, but it is not a UCAS prediction tool. UCAS guidance describes predicted grades as evidence-based professional judgements made by schools or advisers.

Why does my school’s predicted grade differ from this result?

Your school may use mock evidence, coursework quality, teacher judgement, moderation expectations, grade descriptors, attendance, or department policy. The calculator only models weighted percentage arithmetic.

How accurate is the predicted IB grade result?

It is only as accurate as the scores, weights, and boundaries entered. It is strongest for transparent planning and weakest when boundaries are uncertain, marks are unmoderated, or remaining components differ greatly in difficulty.

Related calculators

Browse all calculators in this category

Editorial review

Author: JD

Sources

Enable JavaScript to use interactive calculators.